Jump to main content.

GIS Data Land Cover (GAP) 1999-2001 < Back | Top ^
 GIS Data Table >  Land Cover Maps > Land Cover (GAP) 1999-2001
Datasets Table
Detailed View  (PDF, 1 pp., 1293 KB, about PDF) Dataset Map Dataset Download



RS/GIS Laboratory, College of Natural Resources, Utah State University
Publication_Date: 20040915
Title: nv_gap_2001.img
Edition: version 1.0
Geospatial_Data_Presentation_Form: remote-sensing image
Online_Linkage: N/A
Originator: USGS GAP Analysis Program
Publication_Date: unknown
Tentative title "Southwest Regional GAP Analysis Project Final Report."
Multi-season satellite imagery (Landsat ETM+) from 1999-2001 were used in conjunction with digital elevation model (DEM) derived datasets (e.g. elevation, landform, aspect, etc.) to model natural and semi-natural vegetation. The minimum mapping unit for this dataset is approximately 1 acre. Landcover classes are drawn from NatureServe's Ecological System concept, with 109 of the 125 total classes mapped at the system level. For the majority of classes, a decision tree classifier was used to discriminate landcover types, while a minority of classes (e.g. urban classes, sand dunes, burn scars, etc.) were mapped using other techniques. Twenty mapping areas, each characterized by similar ecological and spectral characteristics, were modeled independently of one another. These mapping areas, which included a 4 km overlap, were subsequently mosaicked to create the regional dataset. An internal validation for modeled classes was performed on a withheld 20% of the sample data. Results of the validation will be presented in the project final report and are not available at this time. While the modeling area encompassed these 5 southwestern states (Arizona, Colorado, Nevada, New Mexico, Utah) the actual GIS dataset downloaded from this site may be a subset of the 5-state region.

The accuracy of this map has been assessed at three levels: 1) a strict accuracy assessment, 2) a fuzzy accuracy assessment where confusion between "very similar" land cover classes is counted as correct, and 3) a fuzzy accuracy assessment where confusion between "moderately similar" land cover classes is counted as correct. The first is the most rigorous assessment of accuracy while the last is the least rigorous assessment of accuracy. The overall accuracy for the strictest assessment (assessment #1) was 56.1%, the first fuzzy assessment (assessment #2) was 70.0%, and the least stringent assessment (assessment #3) was 80.0%.

For more details of individual class accuracies please consult the accuracy assessment accompanying this coverage.

The digital landcover dataset may be used for various purposes with user's discretion. Specifically, this dataset was created for regional terrestrial biodiversity assessment. These data are not intended to be used at scales larger than 1:100,000.
Beginning_Date: 1999
Ending_Date: 2001
Currentness_Reference: ground condition
Progress: Complete
Maintenance_and_Update_Frequency: None planned
West_Bounding_Coordinate: -122.338552
East_Bounding_Coordinate: -111.948505
North_Bounding_Coordinate: 43.170702
South_Bounding_Coordinate: 33.840399
Theme_Keyword_Thesaurus: none
Theme_Keyword: landcover
Theme_Keyword: vegetation cover
Place_Keyword_Thesaurus: none
Place_Keyword: Southwest U.S.
Place_Keyword: Nevada
Access_Constraints: none
Appropriate scale for these data is 1: 100,000 smaller. The user assumes responsiblity when using this dataset.
Remote Sensing/GIS Laboratory, College of Natural Resources, Utah State University
Contact_Person: John Lowry
Address_Type: mailing
Address: UMC 5275
City: Logan
State_or_Province: Utah
Postal_Code: 84322-5275
Country: USA
Contact_Voice_Telephone: 435-797-0653
Arizona: USGS Southwest Biological Science Center, Colorado Plateau Field Station, Northern Arizona University, P.O. Box 5614, Flagstaff, AZ 86011-5614, Principle Investigator: Kathryn Thomas, Landcover Analysts: Sarah Falzarano, Cynthia Wallace, Keith Pohs.

Colorado: Colorado Division of Wildlife, Habitat Resources Section, 6060 N. Broadway, Denver, CO 80216, Principle Investigators: Don Schrupp, Lee O'Brien, Landcover Analysts: Eric Waller, Brett Wolk.

Nevada: U.S. Environmental Protection Agency, Office of Research and Development, P.O. Box 93478, Las Vegas, Nevada 89193-3478. Principle Investigators: William Kepner and David Bradford Landcover Analyst: Todd Sajwaj

New Mexico: New Mexico Cooperative Fish & Wildlife Research Unit, New Mexico State University, P.O. Box 30003, MSC 4901, Las Cruces, NM 88003, Principle Investigators: Ken Boykin, Landcover Analyst: Scott Schrader.

Utah: RS/GIS Laboratory, College of Natural Resources, UMC 5275, Utah State University, Logan, UT 84322-5275, Principle Investigators: Doug Ramsey, John Lowry, Landcover Analysts: Jessica Kirby, Lisa Langs, Gerald Manis.

NatureServe: NatureServe, 2400 Spruce St., Suite 201, Bolder, CO 80302, Vegetation Ecologists: Keith Schulz, Pat Comer.

USGS/EROS Data Center: EROS Data Center, USGS, Sioux Falls, SD 57198 Deputy Science Department Manager: Collin Homer.

USGS/Biological Resources Discipline: P.O. Box 30003, MSC 4901, Las Cruces, NM 88003, SWReGAP Project Coordinator: Julie Prior-Magee.

Microsoft Windows 2000 Version 5.1 (Build 2600) Service Pack 2; ESRI ArcCatalog

Model validation for this dataset was performed by testing model accuracy using a 20% withheld portion of the sample data. Results of validation will be available in the Southwest Regional Gap Final Report, and are not available with this 'provisional' dataset.
Logical_Consistency_Report: Not applicable for raster data
All cells within the Southwest regional boundary (AZ, CO, NV, NM and UT) have an attributed CODE and DESCRIPTION. See Process_Description for more details.
United States Geological Survey, EROS Data Center, National Elevation Dataset
Publication_Date: 1999
Title: 30 Meter Digital Elevation Model
Geospatial_Data_Presentation_Form: raster digital data
Online_Linkage: <http://ned.usgs.gov/>
Type_of_Source_Media: digital
Calendar_Date: 1999
Source_Currentness_Reference: publication date
Source_Citation_Abbreviation: USGS
A digital elevation model (DEM) obtained from the National Elevation Dataset (NED) in 1999 was used to generate the landform GIS dataset.
United States Geological Survey, EROS Data Center, Multi-Resolution Land Characteristics Consortium
Publication_Date: 1999-2001
Title: Landsat 7 , ETM+ Imagery
Geospatial_Data_Presentation_Form: remote sensing image
Online_Linkage: <http://www.mrlc.gov/index.asp>
Type_of_Source_Media: digital
Beginning_Date: 1999
Ending_Date: 2001
Source_Currentness_Reference: publication date
Source_Citation_Abbreviation: USGS
Landsat 7 ETM+ Imagery provided for Spring, Summer and Fall dates between 1999 and 2001
Introduction: The landcover mapping effort for the Southwest Region Gap Analysis Project was a coordinated multi-institution endeavor. Each state institution (see Data_Set_Credit) was responsible for predictor layer preparation, training sample collection, landcover modeling and model validation. The responsibility of the regional landcover lab (Utah State University) was to coordinate these activities among the state land cover teams and NatureServe, to assure as much regional standardization as possible. Detailed documentation on process steps will be included in the project final report and data archival records, both of which are currently unavailable with this 'PROVISIONAL' dataset. The following provides a brief outline of the process steps.

1) Mapping area delineation: The five-state region was divided into 20 ecologically and spectrally similar mapping areas. Bailey's (1995) ecoregions were refined using existing Landsat TM imagery and/or a shaded relief digital map as a backdrop for digitizing more refined boundary lines. Each mapping area provided a functional working area for project management, data collection and modeling. Each state was responsible for 4-5 mapping areas that roughly corresponded to their state jurisdiction.

2) Predictor layer preparation: Landsat 7 ETM+ images were selected from 1999-2001 for three seasons: spring, summer and fall. Scenes were selected for optimal representation of seasonal phenology, and minimal cloud cover. Landsat scenes were standardized using a dark object subtraction method and mosaicked for each mapping area. Image transformations such as brightness, greeness and wetness bands were created for each image mosaic. Digital elevation data, provided by the National Elevation Dataset (1999) were mosaicked for the region and subset for each mapping area. Subsequent digital elevation derivatives, such as aspect and landform were created for each mapping area. Each mapping area had a 2 km overlap with the adjacent mapping area, providing an overall 4 km overlap region between mapping/modeling areas.

3) Training sample collection: Approximately 80,000 samples were used for the 5-state region. The majority of samples were collected through field surveys conducted between 2001-2003. Field surveys involved ocular estimates of biotic and abiotic characteristics, which were recorded on a field form, and subsequently entered into a database. Percent cover of dominant species for Trees, Shrubs, Grasses and Forbs were recorded, as were physical data such as elevation, slope and aspect. A GPS coordinate pair and a polygon were digitized using a laptop computer with TM imagery as a backdrop to record the location of each sample site. Sampling involved traversing all navigable roads in a mapping area and opportunistically selecting samples based on appropriate size and composition (representative) of stands. Additional samples, obtained from other projects, from imagery, DOQ or aerial photo interpretation were also used, though these were in the minority. Each sample location was assigned an appropriate landcover label. Natural and semi-natural vegetation classes were assigned a label based on the Ecological System concept developed by NatureServe. Other cover classes were assigned a label approximating the 2002 USGS National Landcover Dataset legend.

4) Landcover modeling: The majority of natural and semi-natural landcover classes were modeled using a decision tree classifier. This was done using a custom interface for ERDAS Imagine (developed under contract by Earthsat, Corp. for USGS Eros Data Center) that facilitated the integration of the spatial modeling capabilities of Imagine with the decision tree/data mining capabilities of the See5 software (www.rulequest.com). Approximately 20 sub-samples were randomly selected from each sample site polygon, and were used as separate replicates within the decision tree classifier. These sub-samples were 'drilled' through the predictor layers to obtain training information for the decision tree classifier. The decision tree classifier was run using the See5 software with subsequent generation of decision tree 'ruleset'. The rules were then spatially applied to create a GIS dataset in *.img format. Choice of optimal predictor layers for each model was determined heuristically (i.e. trial and error), by visually examining the spatial output of the model and examining the results of the model validation error matrix. Where possible, image pixels representing cloud cover were substituted with pixels from another season/date image as part of the modeling process. A minority of landcover types were not mapped using this method for one or more of the following reasons: too few samples were available to use the decision tree effectively (e.g. burn scars, water bodies, etc.), it was determined that the decision tree classifier could not acceptably discriminate a given cover class (e.g. mesic conifer vs. dry-mesic conifer), the cover class was not a focus of the mapping project (e.g. developed and agricultural areas). Where the decision tree could not be used, other techniques such as localized unsupervised clustering or screen digitizing were used to map these cover classes.

5) Model validation: Decision tree models were validated by generating initial models using 80% of available samples, while withholding 20% of samples. Withheld samples were randomly selected and stratified by cover class (i.e. proportion of withheld samples per cover class was the same for both the training set and the validation set). Withheld sample polygons were intersected through the spatially applied decision rules (i.e. landcover map) to create an error matrix, presenting users, producers and overall 'accuracies.' The kappa statistic was also calculated for the error matrix. This validation process was performed on each of the 20 mapping areas for the 5-state region. It is important to note that this validation approach provides a measure of the ability of the decision tree model to 'predict' landcover in geographic regions where samples were not used, and does not explicitly present an 'accuracy of the map.' Also of importance, a minority of cover classes were not mapped using the decision tree classifier due to the relative rarity of occurrence or having areas falling below minimal mapping unit standards. Additionally, for some classes that were modeled with the decision tree classifier, the number of withheld samples was small.

6) Map refinement (by mapping area): The objective of the project from the beginning was to produce the best map possible. With this objective in mind, the next step was to generate a second decision tree model using 100% of the available sample data. This resulted in a GIS dataset (*.img format) containing all the 'modeled' landcover classes. This dataset was generalized to the minimum mapping unit (MMU) of 1 acre using Imagine's CLUMP utility (4 connected neighboring pixels) and then Imagine's ELIMINATE utility with a minimum clump of pixels set to 1 acre (approximately 5 pixels). For most mapping areas it was necessary to 'superimpose' the non-modeled landcover classes (e.g. developed, agriculture, water, etc.) over the generalized 'modeled' landcover classes. This was done using a conditional statement with Imagine's graphical modeler.

7) Final edits and regional mosaic: Mapping areas were mosaicked together for each state responsibility area (i.e. a group of 4-5 mapping areas) by each state team. Using the 4 km overlap region between mapping areas a 'cutline' was used to edge-match adjacent mapping areas where landcover discontinuities resulted from the modeling process. Fortunately, throughout most of the region discontinuities were few and reliance on the cutline for a satisfactory edge-match was minimal. Once state responsibility areas were mosaicked, a regional mosaic of the five state area was performed--also using cutlines within the 4 km buffer area. The resulting 5-state region mosaic was made available for an internal qualitative review from state teams and NatureServe. Following review of the regional mosaic a limited number of 'major' errors were 'flagged' for final editing. The 'edits' determined to be relatively easy to correct with localized recoding, or a simple conditional model were made to the final map. Because of regional inconsistencies with regards to mapping large transportation routes (e.g. 4 lane interstate) a method of standardizing this feature type was necessary. A buffered (90 meter wide) vector GIS coverage of Interstate highways was rasterized and subsequently 'superimposed' on the final regional map to create the final landcover dataset.

8) Data formating for distribution: The landcover modeling process (steps 4 - 6) resulted in a final unsigned 16 bit *.img file. To reduce filesize and make the data more practical for distribution, the 16 bit image was converted to an 8 bit image, and exported to ArcInfo grid format. While the 16 bit *.img file has been retained in archive, the 8 bit *.img and ArcInfo grid formats are made for distribution.

Process_Date: 200409
Process_Description: Metadata imported.
Source_Used_Citation_Abbreviation: C:\WINDOWS\tmp\xml48.tmp
Process_Description: Dataset copied.
Source_Used_Citation_Abbreviation: J:\NevadaDataBrowser\landcover\nevada_provisional.img

Direct_Spatial_Reference_Method: Raster
Raster_Object_Type: Pixel
Row_Count: 30370
Column_Count: 23820
Vertical_Count: 1

Map_Projection_Name: Albers Conical Equal Area
Standard_Parallel: 29.500000
Standard_Parallel: 45.500000
Longitude_of_Central_Meridian: -96.000000
Latitude_of_Projection_Origin: 23.000000
False_Easting: 0.000000
False_Northing: 0.000000
Planar_Coordinate_Encoding_Method: row and column
Abscissa_Resolution: 30.000000
Ordinate_Resolution: 30.000000
Planar_Distance_Units: meters
Horizontal_Datum_Name: North American Datum of 1983
Ellipsoid_Name: Geodetic Reference System 80
Semi-major_Axis: 6378137.000000
Denominator_of_Flattening_Ratio: 298.257222

Entity_Type_Label: Layer_1
Attribute_Label: ObjectID
Attribute_Definition: Internal feature number.
Attribute_Definition_Source: ESRI
Sequential unique whole numbers that are automatically generated.
Attribute_Label: Value
Attribute_Label: Red
Attribute_Label: Green
Attribute_Label: Blue
Attribute_Label: Opacity
Attribute_Label: Code
Attribute_Label: Description
Attribute_Label: Count
<< Back To Map
The following fields are present in the landcover dataset:

VALUE: Unique identifier for software, not necessarily meaninful to the dataset user.

COUNT/HISTOGRAM: Number of cells/pixels for each class.

RED: For display purposes in ERDAS Imagine

GREEN: For display purposes in ERDAS Imagine

BLUE: For display purposes in ERDAS Imagine

OPACITY: For display purposes in ERDAS Imagine

CODE: Alpha-numeric code for the landcover class.

DESCRIPTION Landcover class name.

Complete descriptions of each landcover class are available in the document titled: "Landcover Descriptions for the Southwest Regional Gap Project"

URL: http://earth.gis.usu.edu/swgap/swgap_legend_desc.pdf

NatureServe. 2004. Landcover descriptions for the Southwest Regional Gap Project. Unpublished document.

Contact_Person: John Lowry
RS/GIS Laboratory, College of Natural Resources, Utah State University,
Address_Type: mailing address
Address: UMC 5275, Utah State University
City: Logan
State_or_Province: Utah
Postal_Code: 84322-5275
Country: U.S.A.
Contact_Voice_Telephone: 435-797-0653
Contact_Electronic_Mail_Address: jlowry@gis.usu.edu
Resource_Description: Southwest ReGAP Landcover dataset
The RS/GIS Laboratory, Utah State University nor any institution responsible for creating this dataset are responsible for the re-distribution, content, or use of these data.
"ERDAS" ERDAS image files (ERDAS Corporation) or ArcInfo GRID format (ESRI)
Format_Version_Number: ERDAS Imagine 8.6 or Workstation ArcInfo 8.0.2
Compression type *.zip or *.tgz. For windows use WinZip. For UNIX use tar -zxf <filename>.tgz
Transfer_Size: 0.000
Network_Resource_Name: <http://earth.gis.usu.edu/>
Fees: none

Metadata_Date: 20050418
Contact_Person: John Lowry
Contact_Organization: RSGIS Laboratory, Utah State University
Address_Type: mailing
Address: UMC 5275, Utah State University
City: Logan
State_or_Province: Utah
Postal_Code: 84322-5275
Country: U.S.A.
Contact_Voice_Telephone: 435-797-0653
Contact_Electronic_Mail_Address: jlowry@gis.usu.edu
Metadata_Standard_Name: FGDC Content Standards for Digital Geospatial Metadata
Metadata_Standard_Version: FGDC-STD-001-1998
Metadata_Time_Convention: local time
Metadata_Access_Constraints: none
Metadata_Use_Constraints: none
Metadata_Security_Classification_System: none
Metadata_Security_Classification: unclassified
Metadata_Security_Handling_Description: none
Online_Linkage: <http://www.esri.com/metadata/esriprof80.html>
Profile_Name: ESRI Metadata Profile

Overview | GIS Data | Text & Tabular Data | Graphic Data | Contacts & Contributors

Local Navigation

Jump to main content.