HADCO

HADCO to Al Gore

HADCO
ANDREW E. LIETZ
President
and
Chief Executive Officer

May 8, 1996

Vice President Albert Gore, Jr.
The White House
1600 Pennsylvania Ave., NW
Washington, DC 20500

Dear Mr. Vice President:

The recent White House Conference on the Environment was a very worthwhile program. I appreciated the opportunity to attend and participate.

I will contact my congressional delegations from New Hampshire, New York and California to express my support for the administrations National Environmental Technology Strategy.

All of us at HADCO are proud of our efforts in working with the EPA and the Clinton/Gore administration on Project X/L and the Design for the Environment initiatives.

We would consider it an honor for you or the President to visit one of our locations during your travels and meet the HADCO employees who are working to build globally competitive products while preserving and protecting the environment.

Thank you for your environmental leadership.

Sincerely,

/s/ Andy Lietz

AL/cw

HADCO CORPORATION.12A MANOR PARKWAY.SALEM, NEW HAMPSHIRE 03079.603/898-8000

HADCO
__________________________________________________

5 June 1996
Dear HADCO Project XL Stakeholder,

Please excuse this tardy transmittal of the enclosed documents:

1. Minutes of the 4/26/96 CA stakeholders meeting.

2. Minutes of the 4/17/96 NH stakeholders meeting.

3. Minutes of the 4/16/96 NY stakeholders meeting.

4. A corrected copy of HADCO's sludge shipments dated 4/24/96.

5. NH DES comments on FPA discussion draft 2 dated 5/16/96.

6. Audubon Society of NH comments on discussion draft 2 (HADCO
draft 4) dated 5/17/96.

7. EPA rewrite of HADCO FPA (draft 4) transmitted 5/17/96.

8. WRC comments on FPA discussion draft 2 dated 5/17/96.

9. HADCO FPA proposal discussion draft 3 dated 5/31/96.

NOTE: Next meeting is 1:00 pm EDT Wed June 19th
or 10:00 am Pacific time
*** Due to time zone difference and teleconferencing between four HADCO sites, the 2:00pm NH meeting had to be changed to 1:00 pm.

Because our teleconference rooms have limited seating (approximately 12 per room), I suggest that those commuting from Derry, NH north meet at the HADCO Derry facility, and from Salem south at the Salem facility (NOTE: meeting at 12A Manor Parkway). Please call Ron lanchette (896-3261) to confirm your attendance at the Derry site, and Lee Wilmot (896-2424) to confirm your attendance at the Salem site to insure that we don't overload one site or the other.

NY, NYS DEC and EPA Reg II attendees can meet at Owego.

CA, CA DTSC and EPA Reg IX attendees can meet at Watsonville.

Please me if you have any questions before the meeting.

/s/ Lee

HADCO CORPORATION.12A MANOR PARKWAY.SALEM, NEW HAMPSHIRE 03079.603/898-8000

HADCO

Local Navigation