Jump to main content.

EF/ ICR Logo Levels of Treated Water Bromate for KANSAS

REMINDER: Data Purpose: The ICR data were collected as part of a national research project to support development of national drinking water standards. They should NOT be used to determine local water systems compliance with drinking water standards, nor should they be used to make personal judgements about individual health risks.

Units: Sample measurements are taken in micrograms per Liter (ug/L) and are regulated in milligrams per Liter (mg/L). A microgram per Liter is equivalent to one contaminant part per billion (ppb). A ppb can be thought of as one grain of salt in a swimming pool. Data for Total Trihalomethanes, haloacetic acids 5, and bromate are presented in ppb. 1 mg/L = 1000 ug/L, or 0.080 mg/L = 80 ug/L = 80 ppb, which happens to be the TTHM standard in the Stage 1 DBP Rule.

Results of Zero: A result of zero may indicate that a sample was analyzed, but that the result was less than the lowest value that the analytical method can reliably report.

City of Topeka Water Utilities Div.

NO DATA - Click here to find out why.

City of Wichita Water and Sewer Dept.

NO DATA - Click here to find out why.


NO DATA - Click here to find out why.

Water District No 1 of Johnson County

(Treated Water)

Plant Name Plant ID Water Type Sampling Month Bromate Concentration (ppb)
Facility No 1 381 Surface Water JAN 1998 .2
Facility No 2 380 Surface Water JAN 1998 .3

Results for mixed water (ground water and surface water) and purchased water can be found under water system summary reports.

How does this state's treated water compare to treated waters nationally for bromate?
View national data for the same month.

ICR Overview
Envirofacts Home Page

Local Navigation

Jump to main content.