Jump to main content.


EF/ ICR Logo Levels of Treated Water Bromate for INDIANA
SEPTEMBER 1997


REMINDER: Data Purpose: The ICR data were collected as part of a national research project to support development of national drinking water standards. They should NOT be used to determine local water systems compliance with drinking water standards, nor should they be used to make personal judgements about individual health risks.

Units: Sample measurements are taken in micrograms per Liter (ug/L) and are regulated in milligrams per Liter (mg/L). A microgram per Liter is equivalent to one contaminant part per billion (ppb). A ppb can be thought of as one grain of salt in a swimming pool. Data for Total Trihalomethanes, haloacetic acids 5, and bromate are presented in ppb. 1 mg/L = 1000 ug/L, or 0.080 mg/L = 80 ug/L = 80 ppb, which happens to be the TTHM standard in the Stage 1 DBP Rule.

Results of Zero: A result of zero may indicate that a sample was analyzed, but that the result was less than the lowest value that the analytical method can reliably report.




City Utilities of Fort Wayne

Water Type - SURFACE WATER
(Treated Water)

Plant Name Plant ID Water Type Sampling Month Bromate Concentration (ppb)
Three Rivers Filtration Plant 368 Surface Water SEP 1997 1.1



EVANSVILLE WATER & SEWER UTILITY

NO DATA - Click here to find out why.



Hammond Water Filtration Plant

NO DATA - Click here to find out why.



Indianapolis Water Company

NO DATA - Click here to find out why.



Northwest Indiana Water Company

NO DATA - Click here to find out why.



South Bend Water Works

NO DATA - Click here to find out why.



Results for mixed water (ground water and surface water) and purchased water can be found under water system summary reports.


How does this state's treated water compare to treated waters nationally for bromate?
Vi ew national data for the same month.


ICR Overview
Envirofacts Home Page


Local Navigation


Jump to main content.